Powrót do bloga
Poradniki 2026-11-20 Dogtra 0 wyświetleń

CUE Additional Receiver Black: Pairing and Setup Guide

CUE Additional Receiver Black: Pairing and Setup Guide

Learn how to pair a CUE additional receiver with your Dogtra system, including compatibility with iQ, 200C, and 280C transmitters.

What the CUE Additional Receiver Does

The Dogtra CUE Additional Receiver in black is a dedicated collar receiver designed to expand your existing CUE system to a second dog. It uses plastic contact points, is fully waterproof, and offers a 400-yard range. The receiver can be worn vertically or horizontally and features a simple power button for operation.

Before you begin pairing, confirm that your transmitter is compatible. The CUE receiver is also compatible with iQ series, 200C, and 280C transmitters, which gives you flexibility if you own multiple Dogtra systems.

CUE Additional Receiver Key Specs

  • CUE ADDITIONAL RECEIVER - BLACK: Plastic contact points, waterproof, 400 yard range, ability to be worn vertically or horizontally, power button. These features confirm the receiver is built for outdoor training, rain or shine, and fits different collar positions.
    CUE ADDITIONAL RECEIVER - BLACK
    CUE ADDITIONAL RECEIVER - BLACK
  • CUE ADDITIONAL RECEIVER - BLACK: Compatible with iQ series, 200C and 280C Transmitters. If you already own one of these transmitters, you can pair this receiver without buying a new system.

Pairing Your CUE Additional Receiver

Pairing a CUE additional receiver follows the same general process as other Dogtra receivers. While exact step sequences may vary by transmitter model, the following checkpoints apply to all supported transmitters.

  1. 1. Prepare the receiver: Charge the CUE receiver fully before first use. Press and hold the power button until the LED lights up, indicating the receiver is on.
  2. 2. Set the transmitter to pairing mode: Refer to your transmitter's manual to enter pairing mode. On most Dogtra transmitters, this involves holding a specific button combination or using a pairing switch.
  3. 3. Initiate pairing on the receiver: With the transmitter in pairing mode, press the receiver's power button briefly. The LED should flash to confirm it is searching for a signal.
  4. 4. Confirm the connection: Once paired, test the connection by pressing a stimulation or tone button on the transmitter. The receiver should respond immediately. Repeat the process if the LED does not respond.

What the Supplied Information Does Not Cover

The product record does not include specific pairing button sequences or LED color codes for the CUE receiver. For exact steps, consult the manual that came with your transmitter or visit Dogtra's support page. If you are pairing with an iQ, 200C, or 280C transmitter, the process is standard for those models but may differ slightly from the CUE transmitter's procedure.

If you are adding a second dog, order one receiver per additional dog. The receiver is sold individually and does not include a collar strap or charging cable.

Powiązane artykuły

Customer Service
Strona główna
Produkty
Koszyk
Profil