Tilbake til bloggen
Veiledninger 2026-11-20 Dogtra 0 visninger

Dogtra 2700T&B Transmitter Controls and Pairing Guide

Dogtra 2700T&B Transmitter Controls and Pairing Guide

Learn how to use the Dogtra 2700T&B transmitter controls and pair it with your receiver. Covers button functions, range, and what to know before setup.

What the 2700T&B Transmitter Does

The Dogtra 2700T&B transmitter is the handheld control unit for the 2700T&B containment system. It sends a radio signal to your dog's collar receiver, defining the boundary and delivering a correction when needed. If your original transmitter is lost or damaged, this replacement unit keeps your existing setup working as expected.

2700T&B Transmitter at a Glance

  • 2700T&B TRANSMITTER: Compatible with the Dogtra 2700T&B system. Replacement transmitter for lost or damaged units. Operates within a 1-mile range (as part of the system). Chargers sold separately. This is a drop-in replacement for your existing 2700T&B system. You keep your current receiver and collar; only the transmitter is swapped. The 1-mile range is system-wide—your dog's range depends on the receiver and environment.
    2700T&B TRANSMITTER
    2700T&B TRANSMITTER

How to Pair the 2700T&B Transmitter with Your Receiver

Pairing the replacement transmitter with your existing receiver is the first step after charging. The supplied information does not include specific pairing steps, but the process typically follows the same general method used for other Dogtra containment transmitters. If your original instructions are lost, check the receiver's manual or contact Dogtra support.

  1. Charge the transmitter: The transmitter requires a charger that is sold separately. Use a compatible Dogtra charger and charge fully before first use.
  2. Turn on the transmitter: Press and hold the power button until the indicator lights turn on. The exact button location may vary by unit version.
  3. Initiate pairing mode on the receiver: Refer to your receiver's manual. Most Dogtra receivers enter pairing mode when turned on near the transmitter.
  4. Complete the pairing: Bring the receiver within a few feet of the transmitter. The receiver should indicate a successful link (e.g., a steady light or tone).

What the Supplied Information Does Not Cover

The available product record does not include specific button labels, a pairing sequence, or operating instructions for the 2700T&B transmitter. If you need the full manual, contact Dogtra customer support or check the product page for downloadable resources. The absence of these details in the record does not mean the transmitter lacks them—only that they are not confirmed here.

Honest Trade-Offs of the Replacement Transmitter

The 2700T&B replacement transmitter is a straightforward part swap: it matches your existing system's 1-mile range and compatibility, but it does not include a charger. If you no longer have the original charger, factor that into your purchase. Also, because the pairing process is not documented in the supplied evidence, you may need to rely on general Dogtra pairing guidance or support resources.

Relaterte artikler

Customer Service
Hjem
Produkter
Handlekurv
Profil