When Your CUE Transmitter Needs a New Battery
If your Dogtra CUE or CUE GEN 2 transmitter won't hold a charge or the range feels short, the internal battery is likely due for replacement. The BP37YS3P is the correct drop-in battery for these models, rated at 3.7V and 440mA. This guide walks you through the replacement process using the manufacturer's own video instructions.
BP37YS3P Battery Specs and Compatibility
- BATTERY BP37YS3P (3.7V 440mA) _YS600, CUE TRANSMITTER: Compatible With Transmitter Models: CUE, CUE GEN 2. Compatible With Receiver Models: YS600. Ensures you order the exact battery that fits your CUE or CUE GEN 2 transmitter. The YS600 receiver uses the same battery, so this part serves two devices.

BATTERY BP37YS3P (3.7V 440mA) _YS600, CUE TRANSMITTER
How to Replace the Battery
Dogtra provides a step-by-step video for this exact replacement. Follow these steps to complete the swap safely.
- Watch the installation video: Dogtra's official video 'How to Replace a Dogtra Battery' walks you through the process. It's the same video linked on the BP37YS3P product page.
- Gather the BP37YS3P battery: The battery is a 3.7V 440mA Li-ion pack. No special tools are required beyond what the video shows.
- Open the transmitter case: Follow the video to safely open the CUE or CUE GEN 2 transmitter without damaging the seals or clips.
- Disconnect and replace the old battery: Unplug the old battery connector, insert the new BP37YS3P, and secure the wiring exactly as shown in the video.
- Close and test: Reassemble the case, charge the new battery fully, and test the transmitter range before using it with your dog.
What the Supplied Information Does Not Cover
The product record confirms compatibility with CUE, CUE GEN 2 transmitters and YS600 receivers, but it does not specify battery disposal instructions, charging times, or safety warnings beyond the installation video. For disposal, follow local battery recycling rules. If your transmitter model is not listed here, double-check compatibility before ordering.

